Air Conditioner Service

5 of the Most Common Problems that Lead to Air Conditioner Service

As summer gets closer and closer, air conditioner service had better be something that crosses your mind a little more often as you think about your total home comfort. Of course there are a host of things to look for when thinking through air conditioner service, but a few issues are more typical than others as you prep to ramp up your air conditioner use for the next few months.

No matter when you last had your air conditioner service completed, make sure to keep these five potential problems in mind when your air conditioner is on the fritz.

1.     Leaking refrigerant

There are a number of things that can cause low refrigerant levels. It might be due to an undercharge during installation or the system could have developed a leak over time. Adding refrigerant to an already leaky air conditioner is like using a band aid on the Hoover Dam. It’s not going to cut it. Leaks should only be taken care of by trained professionals like the ones at Brian’s Heating & Cooling, Inc. in Madera so that you can make certain your system is working at its best. Having that simple air conditioner service completed means that you’ll fix the leak and have the refrigerant charge match the precise specifications of the manufacturer, which provides you with top performance and efficiency.

2.     Inadequate maintenance

Allowing filters and coils to build up with dirt and grime will not only lower your system’s efficiency, but it might cause a host of other problems if unaddressed. Arranging routine maintenance on your air conditioner with Brian’s Heating & Cooling, Inc. means that you’ll have a system providing you comfort when you need it most.

3.     Cycling too frequently

The air conditioner fan controls and compressor are most susceptible to wear, and if you have an air conditioner that cycles on and off routinely, you’ll likely have this issue. You’ll also want your service provider to view the wiring to make certain there isn’t any corrosion and that the wiring job itself is done correctly. Cycling on and off during cooling season might also be a sign that your system may not be sized appropriately and if that is the case you will also notice your home may have high humidity issues.  Because there are several problems to look at, you want to be sure you’re dealing with someone as knowledgeable and experienced like the experts at Brian’s Heating & Cooling, Inc..

4.     Sensor problems

Air conditioners and their thermostat sensors are another common issue that can lead to air conditioner service or AC repair. Thermostat sensors, typically found behind the control panel, measure the temperature of air coming in to the coil. This helps your air conditioner know whether it needs to turn on or stay off, so if the sensor is out of place you could be left with a system that cycles non-stop.

5.     Drainage

Condensation is made by your air conditioner during the cooling process, and your system is created to take care of its own drainage. If the drain becomes clogged you may be subjected to mold or mildew problems, which can lead to an entirely different set of issues.

No matter the age of your air conditioner, there will always be problems that can rear their heads when it is used routinely. Summer is when your system should be running at its best, so give the team at Brian’s Heating & Cooling, Inc. in Madera a call at 559-675-1681 or schedule an air conditioner service appointment online.